Agilent Technologies Ininiium 9000 Dokumentacja Pobierz pdf (Strona 104)

Chapter 5: Troubleshooting

To setup the BIOS

104

To setup the BIOS

If the BIOS settings become corrupt, the Infiniium oscilloscope PC motherboard will not recognize the

hard drive and the unit may not boot. The motherboard BIOS setup procedure is presented in the

following steps.

Configure the Motherboard BIOS parameters.

Use this procedure to set the motherboard BIOS.

Connect the power cable to the Infiniium oscilloscope.

2 Connect the external keyboard to the rear panel.

3 Press the delete key when you see the following prompt on the bottom of the screen

Press TAB to Show POST screen, DEL to enter SETUP, F12 to select boot device.

Note: If you do not see the prompt, or the oscilloscope does not appear to be functioning, check the

ribbon cable connectors. Otherwise, continue with the next step.

BIOS Setup Procedure

Go to Load 15” LCD Defaults and press the Enter key for optimized values or go to Load

8.4” LCD Defaults and press the Enter key for fail-safe values. Select Y to load the defaults,

then press the Enter key.

1 Go to the Save and Exit Setup option and press the Enter key to save and exit the setup.Select

Y to save and exit, then press the Enter key.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 165 166

Brak uwag

Agilent Technologies Ininiium 9000 Dokumentacja Strona 104