Agilent Technologies ESG Instrukcja Użytkownika Pobierz pdf (Strona 24)

General characteristics

Power requirements 90 to 254 V; 50, 60, or 400 Hz;

200 W max

Operating temperature range 0 to 55° C

Storage temperature range –40 to 71° C

Shock and vibration Meets MIL-STD-28800E Type

III, Class 3.

Leakage Conducted and radiated interference meets MIL-STD-

461C CE02 Part 2 and CISPR 11. Leakage is typically <1µV

(nominally 0.1µV with a 2-turn loop) at ≤1000 MHz, measured

with a resonant dipole antenna one inch from any surface with

output level <0 dBm (all inputs/outputs properly terminated).

Storage registers Memory is shared by instrument states, user

data files, sweep list files and waveform sequences. Depending

on the number and size of these files, up to 800 storage registers

and 10 register sequences are available.

Weight

<13.5 kg (28 lb.) net, <19.5 kg (42 lb.)

shipping

Dimensions 133 mm H x 426 mm W x 432 mm D

(5.25 in H x 16.8 in W x 17 in D)

Remote programming

Interface GP-IB (IEEE-488.2-1987) with listen and talk. RS-232.

Control languages SCPI version 1992.0, also compatible with

8656B and 8657A/B/C/D/J

mnemonics.

Functions controlled All front panel functions except power

switch and knob.

IEEE-488 functions SH1, AH1, T6, TE0, L4, LE0, SR1, RL1,

PP0, DC1, DT0, C0, E2.

ISO compliant

The ESG series RF signal generators are manufactured

in an ISO-9001 registered facility in concurrence with

Agilent Technologies commitment to quality.

Accessories

Transit case Part number 9211-1296

Remote interface 83300A

Inputs and outputs

All front panel connectors can be moved to rear with

Option 1EM.

RF output

Nominal output impedance 50 ohms. (Type-N female, front panel)

LF output

Outputs the internally-generated LF source. Outputs 0 to 3 V

peak

into 50 ohms, or 0 to 5 V

peak

into high impedance. (BNC, front

panel)

External input 1

Drives either AM, FM, ΦM, or burst envelope. Nominal input

impedance 50 ohms, damage levels are 5 V

rms

and 10 V

peak

(BNC, front panel)

External input 2

Drives either AM, FM, ΦM, or pulse. Nominal input impedance 50

ohms, damage levels are 5 V

rms

and 10 V

peak

. (BNC, front panel)

Auxiliary interface

Used with 83300A remote keypad sequencer (9-pin RS-232

connector female, rear panel)

10 MHz input

Accepts a 10 MHz ±10 ppm (standard timebase) or ±1 ppm

(high-stability timebase) reference signal for operation with an

external timebase. Nominal input impedance 50 ohms. (BNC,

rear panel)

10 MHz output

Outputs the 10 MHz internal reference level nominally +7 dBm ±2

dB. Nominal output impedance 50 ohms. (BNC, rear panel)

GP-IB

Allows communication with compatible devices. (rear panel)

Sweep output

Generates output voltage, 0 to +10 V when signal generator is

sweeping. Output impedance <1 ohm, can drive 2000 ohms.

(BNC, rear panel)

Trigger output

Outputs a TTL signal: high at start of dwell, or when waiting for

point trigger in manual sweep mode; low when dwell is over or

point trigger is received, high or low 4µs pulse at start of LF

sweep. (BNC, rear panel)

Trigger input

Accepts TTL signal for triggering point-to-point in manual sweep

mode, or to trigger start of LF sweep. Damage levels ≥+10 V or

≤–4 V. (BNC, rear panel)

With ESG-AP and ESG-A series and Option 1E6 only

Pulse input

Drives pulse modulation. Input impedance TTL. (BNC, front or rear

panel)

With ESG-DP and ESG-D series only

“I” input

Accepts an “I” input either for I/Q modulation or for wideband

AM. Nominal input impedance 50 ohms, damage levels are 1 V

rms

and 10 V

peak

. (BNC, front panel)

“Q” input

Accepts a “Q” input for I/Q modulation. Nominal input impedance

50 ohms, damage levels are 1 V

rms

and 10 V

peak

. (BNC, front

panel)

1. ESG series does not implement HP 8657A/B “Standby” or “On” (R0 or R1, respectively) mnemonics.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Agilent Technologies ESG Instrukcja Użytkownika Strona 24

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Generatory prądu Agilent Technologies ESG