Agilent Technologies E8267D PSG Instrukcja Użytkownika Pobierz pdf (Strona 23)

RF path filters

Carrier frequency Nominal filter cutoff frequencies

> 3.2 to 5 GHz 5.5 GHz low-pass ﬁlter

> 5 to 8 GHz 8.9 GHz low-pass ﬁlter

> 8 to 12.8 GHz 13.9 GHz low-pass ﬁlter

> 12.8 to 20 GHz 22.5 GHz low-pass ﬁlter

> 20 to 24 GHz 19.6 to 24.5 GHz bandpass ﬁlter

> 24 to 28.5 GHz 23.5 to 29.0 GHz bandpass ﬁlter

> 28.5 to 32 GHz 28.0 to 32.5 GHz bandpass ﬁlter

> 32 to 36 GHz 31.7 to 36.5 GHz bandpass ﬁlter

> 36 to 40 GHz 35.5 to 40.4 GHz bandpass ﬁlter

> 40 to 44 GHz 39.5 to 44.3 GHz bandpass ﬁlter

Internal baseband generator, arbitrary waveform mode (Option 602)

Channels 2 [I and Q]

Resolution 16 bits [1/65,536]

Baseband waveform memory

Length (playback) 64 megasamples (MSa/channel)

Length (non-volatile storage) 1.2 gigasamples (GSa) on 8 GB removable ﬂash memory (Option 009)

Waveform segments

Segment length 60 samples to 64 MSa

Maximum number of segments 8,192

Minimum memory allocation 256 samples or 1 kbyte blocks

Waveform sequences

Sequencing Continuously repeating

Maximum number of sequences 16,384

Maximum segments/sequence 32,768

Maximum segment repetitions 65,536

1. Modulation frequency response within ±1 GHz of the carrier frequency may be limited by the RF chain cutoff frequencies. For operation near a ﬁlter edge, ﬁlters

can be bypassed using software commands to increase modulation bandwidth.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Komentarze do niniejszej Instrukcji

Brak uwag

Agilent Technologies E8267D PSG Instrukcja Użytkownika Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Generatory prądu Agilent Technologies E8267D PSG