Agilent Technologies N1022A Instrukcja Użytkownika Pobierz pdf (Strona 14)

High-Frequency Active Differential/Single-Ended Probe System

Agilent 1168A/69A InfiniiMax II High-Performance Active Probe System

Specifications

Operating Characteristics

Bandwidth* 1169A: > 12 GHz (13 GHz typical) 1168A: > 10 GHz

Rise and fall time Probe only, 1169A: Probe only, 1168A:

• Probe only 28 ps (20 - 80%), 40 ps (10 - 90%) 34 ps (20 - 80%), 48 ps (10 - 90%)

• When phase compensated by 1169A with DSO81204A: 1168A with DSO81004A:

80000 Series oscilloscope 25 ps (20 - 80%), 36 ps (10 - 90%) 30 ps (20 - 80%), 42 ps (10 - 90%)

1169A with DSO81304A:

23 ps (20 - 80%), 33 ps (10 - 90%)

System bandwidth (–3 dB) 1169A with DSO81304A: 13 GHz (typical) 1168A with DSO81004A: 10 GHz

1169A with DSO81204A: 12 GHz

Input capacitance

Cm = 0.09 pF Cm is between tips

Cg = 0.26 pF Cg is to ground for each tip

Cdiff = 0.21 pF Differential mode capacitance = Cm + Cg/2

Cse = 0.35 pF Single-ended mode capacitance = Cm + Cg

Input resistance* Differential mode resistance = 50 kΩ ±2%

Single-ended mode resistance = 25 kΩ ±2%

Input dynamic range 3.3 V peak to peak

Input common mode range 6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz

Maximum signal slew rate 25 V/ns when probing a single-ended signal

40 V/ns when probing a differential signal

DC attenuation 3.45:1

Zero offset error referred to input ± 1.5 mV

Offset range ± 16.0 V when probing single-ended

Offset accuracy < 3% of setting

Noise referred to input 2.5 mV rms, probe only

Propagation delay ~6 ns (this delay can be deskewed relative to other signals)

Maximum input voltage 30 V peak, CAT I

ESD tolerance > 8 kV from 100 pF, 300 Ω HBM

* Denotes warranted specifications, all others are typical.

1 Measured using the probe amplifier and N5381A solder-in differential probe head.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 41 42

Brak uwag

Agilent Technologies N1022A Instrukcja Użytkownika Strona 14