Agilent Technologies 86100B Instrukcja Użytkownika Pobierz pdf (Strona 8)

Specifications

Mainframe Specifications

HORIZONTAL SYSTEM (Time Base)

Scale Factor (Full scale is ten divisions.)

Minimum 2 ps/div (with 86107A: 500 fs/div)

Maximum 1 s/div

Delay

Minimum ≥24 ns (Standard), 28 ns (Option 001)

Maximum 1000 screen diameters or 10 s, whichever is smaller

Time Interval Accuracy ≤8 ps + 0.1% of reading (dual marker measurement performed at a temperature within

±5°C of horizontal calibration temperature)

8 ps + 0.1% + 0.5 ps/°C to (5 < absolute temperature value <15°C)

Time Interval Resolution ≤ (screen diameter)/(record length) or 62.5 fs, whichever is larger

Display Units Bits or time (TDR mode–meters)

VERTICAL SYSTEM (Channels)

Number of Channels 4 (simultaneous acquisition)

Vertical Resolution 12 bit A/D converter (up to 15 bits with averaging)

Full Resolution Channel Scales Adjusts in a 1-2-5-10 sequence for coarse adjustment or fine adjustment resolution

from the front panel knob

Adjustments Scale, offset, activate filter, sampler bandwidth, attenuation factor, transducer conversion factors

Typical Acquisition Rate 40 kHz per Channel

Record Length Manual setting between 450 and 4050 samples (increments of 1, 1350 default sample setting)

or using up arrow/down arrow keys, increments of 450 samples: 450, 900, 1350 (default) etc.

up to 4050 samples

Specifications describe warranted performance over the temperature range of +10°C to + 40°C (unless otherwise noted). The specifications are

applicable for the temperature after the instrument is turned on for one (1) hour, and while self-calibration is valid. Many performance parameters are

enhanced through frequent, simple user calibrations. Characteristics provide useful, non-warranted information about the functions and

performance of the instrument. Characteristics are printed in italic typeface.

Factory Calibration Cycle -For optimum performance, the instrument should have a complete verification of specifications once every twelve (12) months.

General Specifications

This instrument meets Agilent Technologies’ environmental specifications (section 750) for class B-1 products with exception as described for

temperature and condensation. Contact your local field engineer for complete details.

Temperature

Operating 10°C to +40°C (50°F to + 104°F)

Non-operating –40°C to +70°C (–40°F to +158°F)

Humidity

Operating Up to 90% humidity (non-condensing) at +40°C (+104°F)

Non-operating Up to 95% relative humidity at +65°C (+149°F)

Altitude

Operating Up to 4,600 meters (15,000 ft)

Non-operating Up to 15,300 meters (50,000 ft)

Vibration

Operating Random vibration 5–500 Hz, 10 minutes per axis, 2.41 g (rms)

Non-operating Random vibration 5–500 Hz, 10 minutes per axis, 0.3 g (rms); Resonant search, 5–500 Hz

swept sine, 1 octave/min sweep rate, 0.75 g, 5 minute resonant dwell at 4 resonances/raxis

Power Requirements

Voltage 90–132 or 198–264 Vac, 48–66 Hz

Power (including modules) 604 VA; 391 W

Weight

Mainframe without modules 15.5 kg (34 lb)

Each Module 1.2 kg (2.6 lb)

Mainframe Dimensions (excluding handle)

Without front connectors and rear feet 215.1 mm H x 425.5 mm W x 566 mm D (8.47 in x 16.75 in x 22.2 in)

With front connectors and rear feet 215.1 mm H x 425.5 mm W x 629 mm D (8.47 in x 16.75 in x 24.8 in)

Time offset relative to the front panel trigger output on the instrument mainframe.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Komentarze do niniejszej Instrukcji

Brak uwag

Agilent Technologies 86100B Instrukcja Użytkownika Strona 8

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Agilent Technologies 86100B