Agilent Technologies EXG Instrukcja Użytkownika Pobierz pdf (Strona 4)

Frequency Specifications

Frequency range

Frequency range Option 501 (N5171B only) 9 kHz to 1 GHz

Option 503 9 kHz to 3 GHz

Option 506 9 kHz to 6 GHz

Resolution 0.01 Hz

Phase offset Adjustable in nominal 0.1 ° increments

Frequency bands

Band Frequency range N

1 9 kHz to < 5 MHz Digital synthesis

1 5 to < 250 MHz 1

2 250 to < 375 MHz 0.25

3 375 to < 750 MHz 0.5

4 750 to < 1500 MHz 1

5 1500 to < 3000.001 MHz 2

6 3000.001 to 6000 MHz 4

Frequency switching speed

2, 3

Standard Option UNZ

Option UNZ, typical

CW mode

SCPI mode ≤ 5 ms, typical ≤ 1.15 ms ≤ 950 µs

List/step sweep mode ≤ 5 ms, typical ≤ 900 µs ≤ 800 µs

Digital modulation on (N5172B only)

SCPI mode ≤ 5 ms, typical ≤ 1.15 ms ≤ 1.05 ms

List/step sweep mode ≤ 5 ms, typical ≤ 900 µs ≤ 800 µs

1. N is a factor used to help deﬁ ne certain speciﬁ cations within the document.

2. Time from receipt of SCPI command or trigger signal to within 0.1 ppm of ﬁ nal frequency or within 100 Hz, whichever is greater, and amplitude

settled to within 0.2 dB from 20 to 30 °C. Implies simultaneous frequency and amplitude switching.

3. With internal channel corrections on, the frequency switching speed is < 1.3 ms, measured for list mode and SCPI mode cached frequency points.

For the initial frequency point in SCPI mode the time is < 3.3 ms, measured. The instrument will automatically cache the most recently used 1024

frequencies. There is no speed degradation for amplitude-only changes.

4. Speciﬁ cations apply when status register updates are off.

1 2 3 4 5 6 7 8 9 ... 30 31

Brak uwag

Agilent Technologies EXG Instrukcja Użytkownika Strona 4