Agilent Technologies U4154A Przewodnik Instalacji Pobierz pdf (Strona 34)

34 U4154A Logic Analyzer Installation Guide

2 Setting up the Hardware for U4154A

Figure 9 Connecting multiple chassis and host PCs to a network (One

chassis per host PC)

This is the recommended scenario when using multiple

chassis.

In this scenario, the connectivity of the chassis to a network

is highly recommended but not mandatory. However, host PC

must be connected to a network.

If you do not want to connect the chassis to a network, you

can use the Intel PRO/1000 PL network connection. The

PCIe connection between the host PC and chassis creates an

implicit LAN connection which is displayed as the Intel

PRO/1000 PL network adapter in Device Manager on host

PC. Therefore, in such a situation, ensure that the Intel

PRO/1000 PL network connection is operational and

configured to use the static IP address 169.254.1.1 and

subnet mask 255.255.0.0. In case you encounter problems

with using the Intel PRO/1000 PL network connection, refer

to the topic “Troubleshooting ESM Connectivity Issues" on

page 64.

If you connect the chassis to a network, then the Intel

PRO/1000 PL network connection is not used. Therefore,

disable the Intel PRO/1000 PL network connection using the

Device Manager. (This is preferred.)

Multiframe scenario with multiple chassis per host PC

The following figure illustrates the connectivity of host PC

and chassis to a network when you are using multiple AXIe

chassis (multiframe scenario). In this scenario, there are

multiple chassis connected to a host PC via PCIe interface.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

Brak uwag

Agilent Technologies U4154A Przewodnik Instalacji Strona 34