Agilent Technologies 8000 Series Dokumentacja Pobierz pdf (Strona 122)

Chapter 6: Replacing Assemblies

To remove and replace the motherboard

122

To remove and replace the motherboard

Use this procedure to remove and replace the motherboard with the same brand (Intel or

ADLINK). At some point after this manual was published it will become necessary to replace all

Intel motherboards with ADLINK motherboards because the Intel motherboard is no longer

available.

When necessary, refer to other removal procedures. The graphics in this chapter are

representative of the oscilloscope at the time of this printing. Your unit may look different.

Disconnect the power cable and remove the top cover.

2 Remove the CD-ROM drive (see page 102).

3 Remove all cables from the PCI cards.

4 Remove all PCI cards from the motherboard (see page 117 for bracket removal).

5 Disconnect all cables from the motherboard.

6 Remove the six 5 mm port lock screws from the back panel connectors.

7 Remove the 5 short and 3 long Torx T10 screws holding the motherboard to the ATX

tray.

Figure 6-28

Removing the motherboard

8 Lift the motherboard out of the tray.

Port lock

screws (6)

Torx T10

screws (8)

PCI cards

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 161 162

Brak uwag

Agilent Technologies 8000 Series Dokumentacja Strona 122