Agilent Technologies HP 3325B Podręcznik Użytkownika Pobierz pdf (Strona 6)

Section II

Installation

2-1 Initial Inspection.

2-2 Refer to table 5-1 for a list of parts included in the 85662A-LCD Retrofit Kit.

Verify that all parts listed are included in your kit.

2-3 Installation of the Color LCD Kit.

2-4 Installation should not be attempted unless it is done so by a highly skilled

electronic repair technician.

2-5 Kit installation time is approximately 3 hours.

2-6 Refer to spectrum analyzer service manual for location of assemblies.

2-7 Disconnect AC power cord.

2-8 Remove all cables connecting the 85662A IF section to the 8566/67/68 RF

section.

2-9 Separate the IF section from the RF section.

2-10 Remove the top, bottom, and side covers from the 85662A.

2-11 Remove the eight front corner frame screws connecting the front panel assembly

(figure 1) to the four frame struts.

2-12 Remove the one screw on the bottom center of the front panel assembly that

attaches it to the centerline motherboard support.

2-13 Carefully separate the front panel assembly from the frame struts.

Figure 1: Front Panel Assembly

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Brak uwag

Agilent Technologies HP 3325B Podręcznik Użytkownika Strona 6