Agilent Technologies VEE Pro Instrukcja Obsługi Pobierz pdf (Strona 80)

58 Agilent VEE - Practical Graphical Programming

3 Instrument Controls

Configuring a virtual instrument to a real instrument

1 Select Menu Bar => I/O => Instrument Manager.

2 Choose scope(Agilent54504a(@(NOT LIVE)).

3 Open Properties; double- click on the VISA Address field; change the

address to GPIB0::9::INSTR.

4 Save this exercise again as EXER03.1

NOTE

• The "9" in the address signifies the default address for oscilloscopes and "0" is

the GPIB board card number.

• Click on Advanced under Properties; toggle the Live Mode to ON; click OK twice.

• The Instrument List will now include a GPIB7 heading with

oscope(@)GPIB0::9::INSTR appearing under it.

NOTE

As this now represents a live (real) instrument, an interface to an actual oscilloscope

must be connected to the PC system via a card. See EXER03.2 below.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 112 113

Brak uwag

Agilent Technologies VEE Pro Instrukcja Obsługi Strona 80