Agilent Technologies N4010A Dokumentacja Pobierz pdf (Strona 23)

Making Your First Measurements

Running a Confidence Check on the Front Panel (Bluetooth)

Chapter 2 15

Running a Confidence Check on the Front Panel

(Bluetooth)

To operate Bluetooth testing from the Front Panel, your N4010A must

be configured with:

• Option 101.

Refer to the N4010A web page at www.agilent.com/find/N4010A for

firmware updates.

To verify your configuration, press the

System key, an example is

shown in Figure 2-1.

Figure 2- 1 Typical System Configuration Screen

To run a confidence check you also require a Bluetooth device, for

example, a Bluetooth enabled mobile phone.

1. Make the Equipment Under Test (EUT) discoverable. Refer to

manufacturer’s handbook for instructions.

2. Fix an antenna to the RF IN/OUT or connect EUT directly to the

connector. Shown in Figure 2-2.

Figure 2- 2 Test Set RFIO Connections

3. Press the

Config key.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Brak uwag

Agilent Technologies N4010A Dokumentacja Strona 23