Agilent Technologies E1330B Instrukcja Użytkownika Pobierz pdf (Strona 20)

18 Configuring the Agilent E1330B Digital I/O

Chapter 2

Setting the Address Switch

Refer to Figure 2-1. In the center rear of the module, next to the P1

connector, you will find the logical address switch. Its factory setting is 144;

rockers 4 and 7 are closed, all others are open. You can select the address of

the Digital I/O module to any number 0–255 (decimal). The default setting

of the address switch is shown in Figure 2-2.

Note To be recognized as an instrument when you are using the Digital I/O

module in an Agilent E1300/1301 Mainframe or with an Agilent E1405 or

E1406 Command Module, the logical address must be set to a multiple of 8.

Figure 2-2. Logical Address Switch Set at 144

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 155 156

Brak uwag

Agilent Technologies E1330B Instrukcja Użytkownika Strona 20